按摩师与女人,欧美一进一出抽搐大尺度视频,天天做天天爱夜夜爽,人妻少妇精品视频一区二区三区

Welcome to Shanghai Qiao Feng industrial co., LTD's website
Position
Home > Product > Spray drier
Small desktop spray dryer for laboratory use
Device Name: Small desktop spray dryer for laboratory use
Equipment type: QFN-9000Z (customized)
Equipment specifications: 1500ml/h (customized support)
Test machine: Support the test machine to do the experiment
Scope of application: Powdered and granular solid products are produced in solution, emulsion, suspension and paste liquid raw materials.
Applicable scenarios: Scientific research, chemical industry, food, pesticide, medicine and biological industry in Universities
Is it guaranteed? Three-year National Warranty
Contact number: 17317246351
Detail

1、 Product Description:
       The laboratory small desktop spray dryer is mainly suitable for the production of micro particle powder in the laboratories of universities, research institutes and food pharmaceutical and chemical enterprises, and is widely applicable to all solutions, such as emulsion and suspension.
       It is suitable for drying heat sensitive materials, such as biological products, biological pesticides, enzyme preparations, etc. Because the ejected materials are only subjected to high temperature and instantaneous heating when they are sprayed into mist, the active ingredients of these active materials remain unchanged after drying.

臺式桌面式噴霧干燥機
Multiple applications:
Beverages, spices and pigments, milk, egg products, plant and vegetable extracts, pharmaceutical synthetic thermosensitive plastics, polymers and resins, aromatics, blood products, ceramic and superconductor biochemical products, dye soaps and detergents, food, adhesives, oxides, bone powder and tooth powder, etc.

2、 Main features:
1. The concentric coaxial atomizer designed by Qiao Feng can be customized;
2. The 16 ? silicone tube with wear resistance and corrosion resistance is selected to meet the transportation requirements of most heat sensitive materials;
3. The conveying device is built-in peristaltic pump, which can accurately control the speed and make the unidirectional rotation safer;
4. It is equipped with high borosilicate glass drying components with good light transmittance and acid and alkali resistance;
5. The clamp of fixed components is made of high-quality aluminum alloy, which is firm and durable without dead angle;
6. Cyclone separator and bag type dust collector can be switched to use, which can screen and collect materials with different particle sizes;
7. The oil-free air compressor imported from Taiwan has the advantages of low pollution, low noise and sustainable operation;
8. Adopting high precision PID temperature control technology, the temperature control precision range is 1 ℃, and the electric heating source is stable and more environmentally friendly.
9. Intelligent human-computer interaction interface, simple operation, support Chinese and English switching
10. After drying, the particle size of the dry powder is uniform, and more than 95% of the dry powder is in the same particle size range.
11. For sticky materials, a nozzle cleaner (through needle) is provided. When the nozzle is blocked, it will automatically clear, and the frequency of the needle can be adjusted automatically.
12. Stainless steel drying chamber can be used for tower wall purging.
13. Accept customization (e.g. complete with imported accessories, sandblasting appearance, design model according to laboratory environment, etc.)

3、 Equipment parameters:

Water evaporation

1000mL-2000 mL/h

Minimum feed rate

50ml

Delivery pump

4-way rotor pump (feed pipe: imported silicone peristaltic tube) (6-way rotor pump can be selected)

Atomization mode

Refined two fluid atomizing nozzle (one gas and one liquid) (two fluid atomizing nozzle for refined plastics is optional)

Nozzle diameter

 (spraying system) can be equipped with 07 / 1.0 / 1.5 / 2.0 / 2.2 mm, and the standard configuration is 1.0 mm (silicon carbide can be selected, and the wear resistance is about 10 times that of stainless steel)

Average drying time

1.0~1.5S

Temperature setting range

30-300 ℃ PID automatic control; (temperature can be set)

Temperature regulation accuracy

Inlet temperature ± 1 ℃

Fan

Single phase low noise fan, fan flow rate; 3.2 m3 / min, wind pressure; 19 kPa 9 (Taiwan imported fan, powerful silent function)

Temperature sensor

PT-100 thermocouple

Spray regulation range

0-0.8 MPa (0.2 MPa recommended)

Spray pressure intake volume

106l / min; air displacement: 36L / min; input power: 580W

Air compressor for spray

Matching

Electric heater power

 3.5KW

Rated voltage

220V/50HZ

Air inlet treatment

Fiber cotton filter

Flow range adjustment of feed pump

0-26ml/min

Heat dissipation of electric box

Brushless DC motor fan heat

Air connection for spray

Air tube with outer diameter of 6 mm

Function protection

If the fan is not started, the heater can not be started, the air compressor can not be started, and the peristaltic pump cannot be started

Dimensions

1090(W)X600(D)X890(H)mm

Equipment control mode

touch screen

Material / weight

304/105KG

Note: for equipment with larger evaporation capacity, please inquire online or call

Contact us
 

Tel: 17317246351

Mailbox: sales@qfn17.com

URL: http://www.4tar.com

Address: Shanghai fengxian canal north road no. 1185

Scan QR codeClose
国模冰莲自慰肥美胞极品人体图| 女人18片毛片60分钟| 亚洲精品乱码久久久久久中文字幕| 黑人40厘米全部进去a片| 亚洲精品乱码久久久久久中文字幕| 欧美一区二区三区放荡人妇| 人人妻人人爽人人做夜欢视频| 年轻教师6电影完整版| 欧洲多毛裸体xxxxx| 日产欧产美韩系列| 三级在线看中文字幕完整版| 国产日产久久高清欧美一区| 中文字幕乱妇无码av在线| 日本伊人精品一区二区三区| 99久久人人爽亚洲精品美女| 成人综合伊人五月婷久久| 级毛片内射视频| 最近免费中文字幕大全高清mv| 婷婷色婷婷开心五月四房播播| 麻豆视传媒官网免费观看| 好爽…又高潮了毛片喷水| 一本久道中文无码字幕av| 亚洲一区 日韩精品 中文字幕| 国产精品无码av无码| 图片区小说区激情区偷拍区| 玉米地被老头添的好爽| 欧美变态另类牲交| 精品少妇人妻av一区二区| 欧美一区二区三区| 欧美大成色www永久网站婷| 亚洲精品97久久中文字幕无码| 日本亲与子乱人妻hd| 成人片黄网站a毛片免费| 人人爽人人片人人片av| 国产激情久久久久影院老熟女 | 最近免费中文字幕大全高清mv| 女厕精品合集ktv偷窥| 高中女学生破苞视频免费| 麻豆视传媒官网免费观看| 久久精品女人天堂av免费观看| 人人妻人人澡人人爽欧美一区九九 |